Performance Data
|
| Standby Ouput (KW): 800 |
| Prime Output (KW): 725 |
| Continous Output (KW): 585 |
| Design: Revolving field. Self-ventilated. Drip-proof. Single Bearing. Synchronous |
| No. of Poles: 4 Pole |
| Excitation: Brushless with PMG/AVR |
| Generator RPM: 1800 |
| Votage - 3 Phase: 120/208V 277/480V |
| Voltage Selector Switch: Standard |
| Armature Connection: WYE Connection |
| Voltage Regulation - (No load to full load): 0.5% |
| Amps - Three Phase 208V: 2775 |
| Amps - Three Phase 480V: 1202 |
| Power Factor: 0.8 |
| Frequency - (50 hz models availble on request): 60 Hz |
| Insulation: Class H |
Power Source
|
| Engine Make/Model: Cummins QST30-G2 |
| Starting System: 24VDC |
| Design: 4 Cycle. Water Cooled. Turbocharged. Aftercooled |
| Displacement: 1,860 CID |
| No. Cylinders: V-12 |
| Bore x Stroke In.(mm): 5.51 x 6.50(140 x0165.1) |
| HP at Rated Speed: 1,200 |
| Fuel Tank Capacity Gal.: 1000 |
| Fuel Consumption - |
| Full load gph: 60 |
| 3/4 load gph: 39.7 |
| 1/2 load gph: 26.9 |
| 1/4 load gph: 15.2 |
| Engine Coolant Capacity gal.: 85.5 |
| Oil Capacity with filters gal.: 40.7 |
| Battery: 24 VDC / 3200 CCA |
Dimensions
|
| Overal Length - ft. : 40 x 8 x 9.5 |
| Overal Width - ft. : 8 |
| Overal Height - ft. : 9.5 |
| Approx. Wet Weight : 37,760 lbs. |
| Approx. Wet Weight with Trailer: 44,500 lbs. |
Generator Accessories
|
| Automatic Start/Stop Control: Standard |
| Battery Charger: Standard |
| Engine Pre-Heater: Standard |
| ISO Chassis: Option |
| Parallel Operating System: Option |
| Fuel Filtering System - 2 Micron: Option |
| Oil Reserve with Level Control: Option |
| Fueling Platform: Option |
| Access Ladders: Option |
| Digital Control with NFPA shutdowns: Standard |
| Double Wall Fuel Tank - 900 gallons: Option |
| Crankcase Ventilation Filtering System: Standard |
| |
